journal
Heat Transfer Intensification in A Shell and Helical Coil Heat Exchanger Using Water-Based Nanofluids
Area/Stream: Chemical Engineering, Authors: T. Srinivas , A. Venu Vinod Keywords: Dean number , Intensification, Heat transfer rate, Helical coil, NanofluidJournal Name: Chemical Engineering and Processing: Process Intensification Year:2016, Month:April, Volume: 102, Issue: Page No: 1-8, ISSN: 0255-2701, DOI/Link: https://doi.org/10.1016/j.cep.2016.01.005Abstract:
Nanofluids have been reported to be capable of heat transfer intensification. Performance of an agitated shell and helical coil heat exchanger has been experimentally investigated using three water based nanofluids (Al2O3, CuO and TiO2). The studies were carried out at different concentrations of nanofluid, nanofluid temperatures, stirrer speeds and coil-side fluid flow rates. Nanofluids of three concentrations 0.3, 0.6, 1, 1.5 and 2% by weight have been prepared for this purpose. Cetyltrimethyl ammonium bromide (CTAB) was used as stabilizer. Nanofluid was used as heating medium (shell-side) and water was used as coil-side fluid. It was found that heat transfer rate increases with increase in nanofluid concentration. Higher values of nanofluid concentration, stirrer speed and shell-side fluid temperature resulted in greater effectiveness of heat exchanger. A maximum increase of 30.37%, 32.7% and 26.8% in effectiveness of heat exchanger was observed for Al2O3, CuO and TiO2/water nanofluids respectively, when compared to water, indicating intensification of heat transfer.
Cite this: T. Srinivas , A. Venu Vinod,"Heat Transfer Intensification in A Shell and Helical Coil Heat Exchanger Using Water-Based Nanofluids", Chemical Engineering and Processing: Process Intensification, 102, , April, 2016, 1-8, 0255-2701, https://doi.org/10.1016/j.cep.2016.01.005
Views: 4250
Download File
News
